| Document | Global ACI-TECH-3-TR 2029-09-30 (M), mandatory |
| Issue date | September 4, 2026 |
| Application date | September 16, 2026 |
| End of transition | September 30, 2029 |
| Last day for initial certification under 2015 | March 31, 2028 |
| Volume affected | More than one million accredited ISO 9001 certificates worldwide |
Until now, the transition to ISO 9001:2026 was discussed in estimates. That is no longer the case. On September 4, 2026, Global ACI —the body that replaced IAF and ILAC— issued the mandatory transition document Global ACI-TECH-3-TR 2029-09-30 (M), applicable from September 16, 2026. The dates that follow are not recommendations: they bind accreditation bodies and certification bodies.
The complete timeline
- March 31, 2027 (6 months). Accreditation bodies must be ready to assess certification bodies against the 2026 edition.
- June 30, 2027 (9 months). Each certification body submits its transition declaration with supporting documents to its accreditation body.
- September 30, 2027 (12 months). Accreditation bodies close the transition decisions for their bodies.
- March 31, 2028 (18 months). After this date, no initial certification is issued under ISO 9001:2015. Every new certification is issued under the 2026 edition.
- September 30, 2029 (36 months). End of the transition. A certificate issued under the 2015 edition that has not transitioned is no longer valid.
Why your real deadline is 2027 and not 2029
The sequence has a dependency that is easily misread if you only look at the final date. Your certification body cannot issue certificates under the 2026 edition until its accreditation body approves its transition, and that closing happens, at the latest, on September 30, 2027. From then until September 30, 2029 there are twenty-four months to move more than one million accredited certificates worldwide, according to the figure cited by the document itself.
Those twenty-four months are not evenly distributed. Certification bodies concentrate transitions at the end of the period because their clients behave the same way. Whoever arrives in the final year negotiates with less auditor availability and less room on dates.
Where the transition is made
The document is explicit: the transition audit “may be carried out in conjunction with the surveillance audit, the recertification audit or by means of a separate special audit”. It also allows the use of remote means (ICT) provided the body can demonstrate that the audit objectives were met.
There is a cost warning worth anticipating: the body must assess whether it needs additional audit time, considering at least the degree of change in the client’s management system. The more alive your documentation is, the less additional time is justified.
What changes in the standard
The changes are of emphasis, not structure. Anyone with a system in use does not need to rebuild it. The clauses that concentrate the work are these:
- 5.1.1 i) — new item: top management must promote a quality culture and ethical behavior.
- 5.2.1 e) — the quality policy must consider the context of the organization and support its strategic direction.
- 6.1 — reorganized into three clauses: 6.1.1 determining risks and opportunities, 6.1.2 actions to address risks and 6.1.3 actions to address opportunities.
- 6.3 — planning of changes: monitoring of effectiveness, communication of the change and review of results are added.
- 7.3 e) — awareness incorporates quality culture and ethical behavior.
- 9.3.2 — management review moves from “planned and carried out taking into consideration” to “shall include”, and adds changes in the needs and expectations of interested parties.
Add to this the alignment with Annex SL, updated terms and definitions, changes to the informative Annex A and the removal of Annex B.
Your certification body’s declaration is not a formality
The document states that a declaration “that is false or cannot be substantiated constitutes a nonconformity with the Conditions of Accreditation”, with corrections and corrective actions and, if not resolved within the set deadlines, suspension or withdrawal of accreditation.
There is a point few clients know about and that is worth watching: a certification body that will not transition must inform its clients in writing before June 30, 2027, stating the validity of the certificate and the consequences of not transferring or not transitioning. If you receive nothing from your certification body in the first half of 2027, ask.
Three decisions for this quarter
- Ask for the date in writing. Ask your body in which audit you are due to transition and keep the answer on file.
- Assess the gap now. Compare your system against the 2026 edition, starting with planning of changes (6.3) and management review (9.3). That work does not expire.
- If you are implementing for the first time, do it with the 2026 edition. Getting certified today under 2015 means buying a transition that expires in 2029.

We carry out the gap assessment against the 2026 edition through AXONA’s SIGEN line.
Source: Global ACI-TECH-3-TR 2029-09-30 (M), “Transition Requirements for ISO 9001:2026”, issued on September 4, 2026, applicable from September 16, 2026.
Frequently asked questions
How long is my ISO 9001:2015 certificate valid?
Until September 30, 2029 at the latest. If you have not transitioned by then, the certificate is no longer valid even if its printed expiry date is later.
Can I get certified for the first time under ISO 9001:2015?
Only until March 31, 2028. After that date, all initial certifications are issued under the 2026 edition. In practice, getting certified today under 2015 means paying for an additional transition before 2029.
Does the transition require a separate audit?
Not necessarily. The document allows it to be done within the surveillance or recertification audit already scheduled, or through a special audit. The body must assess whether additional time is required according to the degree of change in the system.
What happens if my certification body does not transition?
It must inform its clients in writing before June 30, 2027, stating the validity of the certificate and the consequences of not transitioning. In that case, a transfer to another accredited body should be evaluated.
Where is it best to start the review?
With planning of changes (6.3) and management review (9.3.2), which are the clauses with new verifiable requirements, and with the treatment of risks and opportunities, which was reorganized into 6.1.1, 6.1.2 and 6.1.3.
Primary sources
Need support on this topic? We offer an initial scope assessment at no cost.
Let’s talk about your case →About the author
ONAC Lead Evaluator since 2012 and ISO Management Systems Lead Auditor since 2005 at accredited certification bodies. Industrial Engineer, Master in Organizational Management and Specialist in Occupational Health and Safety. Graduate professor in specialization and master’s programs at Colombian universities. More than 25 years of experience in manufacturing and services, in the public and private sectors.
View professional profile on LinkedIn →