| Service | AVALO-01 · ISO/IEC 17025 Accreditation (Laboratory Scheme) |
| Standard cited in the regulation | ISO/IEC 17025, by number, four times |
| Where | Resolution 1857 of 2024, Article 12, items 15 to 18 |
| Frequency of the certificates | Annual |
| Who can sign them | Third parties accredited by ONAC (Article 7, paragraph 2) |
In this year’s conversations with calibration and testing laboratories, accreditation is almost always discussed in the abstract: as a sign of quality, a commercial differentiator, something worth having. There is one case in which it stops being abstract, and it is worth reading literally, because a regulation is rarely this explicit.
The standard is written into the regulation, by number
Resolution 1857 of May 27, 2024 of Colombia’s Ministry of Labor sets the minimum occupational health and safety requirements for work with boilers. In items 15 to 18 of its Article 12 it requires four documents, all four with the same wording: a certificate issued by a natural or legal person “by means of a certificate of conformity with the National Accreditation Body of Colombia, ONAC, under standard ISO/IEC 17025”.
- Calibration certificate for safety and relief valves (item 15), annual, and also every time the valve opens during operation.
- Hydrostatic test of the boiler (item 16), annual, prior to operation.
- Calibration certificate for pressure gauges and thermometers (item 17), annual.
- Hydrostatic test of the inlet and outlet piping (item 18), annual.
Paragraph 2 of Article 7 completes the framework: tests on components are carried out “through suitable third parties, provided they are accredited by the National Accreditation Body of Colombia - ONAC”.
What this means on the laboratory side
Seen from a plant, this is an obligation. Seen from a laboratory, it is something else: every boiler in operation in Colombia needs four certificates a year, and the regulation has already said who can sign them. It is not a client preference or a purchasing criterion that can be negotiated: a certificate issued by a competent workshop without accreditation does not satisfy the item, however well done the work is.
That is why the question for a calibration or testing laboratory is very concrete, and has only two possible answers:
- If you are already accredited: does your accredited scope cover these quantities and these tests? A current accreditation for one quantity does not back a different test, and it is the mistake that most often leaves a certificate without evidentiary value.
- If you are not: you are leaving on the table a demand that a regulation makes mandatory and annual.
What AXONA does in the AVALO-01 service
We support the complete accreditation cycle under ISO/IEC 17025 in the Laboratory Scheme —testing, calibration and clinical—:
- Diagnosis against the scheme and definition of the scope it makes sense to accredit first.
- Method validation and measurement uncertainty estimation, which is where findings concentrate.
- Proficiency testing and control of the validity of results.
- Preparation for the assessment visit by ONAC or by the accreditation body of your country.
Message us on WhatsApp and we will review your scope at no cost: message AXONA on WhatsApp. Service details are on AVALO — Accredited Bodies.
Source: Colombian Ministry of Labor, Resolution 1857 of May 27, 2024, on minimum occupational health and safety requirements for work with boilers: Article 7 paragraph 2 (tests through third parties accredited by ONAC) and Article 12 items 15 to 18 (calibration certificates for safety and relief valves, pressure gauges and thermometers, and hydrostatic tests of the boiler and of the inlet and outlet piping, by means of a certificate of conformity with ONAC under standard ISO/IEC 17025, on an annual basis). Official text consulted in the regulatory database of the Bogotá Mayor’s Office on October 30, 2026. Standards are cited by number and edition; their text is not reproduced.
Frequently asked questions
Does Resolution 1857 of 2024 require boiler certificates to be issued by an accredited laboratory?
Yes. Items 15 to 18 of Article 12 require the certificates to be issued by means of a certificate of conformity with the National Accreditation Body of Colombia, ONAC, under standard ISO/IEC 17025. Article 7, paragraph 2, adds that tests on components are carried out through third parties accredited by ONAC.
Which boiler certificates does the regulation require, and how often?
Four, all annual: calibration of safety and relief valves (and also every time the valve opens during operation), hydrostatic test of the boiler prior to operation, calibration of pressure gauges and thermometers, and hydrostatic test of the inlet and outlet piping.
Is a certificate issued by a competent but unaccredited workshop valid?
It does not satisfy the item. The regulation does not evaluate the technical quality of the work but the formal qualification of whoever signs it: without ONAC accreditation in the corresponding scope, the certificate does not meet the requirement, however well the test was performed.
Is being accredited under ISO/IEC 17025 enough?
You need to check the scope. A current accreditation for one quantity does not back a different test. Verifying that the accredited scope covers exactly the quantities and tests to be certified is what prevents the certificate from losing its evidentiary value.
Primary sources
We review at no cost whether your accredited scope covers the tests the regulation requires, or where to start if you are not yet accredited.
Message AXONA on WhatsApp →